​​
Dobinsons - 2-3" MRR 3-Way Adjustable Lift Kit | Toyota Tundra 2022+ | DSSKITMRA22T
Dobinsons - 2-3" MRR 3-Way Adjustable Lift Kit | Toyota Tundra 2022+ | DSSKITMRA22T
Dobinsons - 2-3" MRR 3-Way Adjustable Lift Kit | Toyota Tundra 2022+ | DSSKITMRA22T
Dobinsons - 2-3" MRR 3-Way Adjustable Lift Kit | Toyota Tundra 2022+ | DSSKITMRA22T
Dobinsons - 2-3" MRR 3-Way Adjustable Lift Kit | Toyota Tundra 2022+ | DSSKITMRA22T
Dobinsons - 2-3" MRR 3-Way Adjustable Lift Kit | Toyota Tundra 2022+ | DSSKITMRA22T

Dobinsons

Dobinsons - 2-3" MRR 3-Way Adjustable Lift Kit | Toyota Tundra 2022+ | DSSKITMRA22T


$3,370.00 Sale Save
  • Front Coil Spring Specs
    • C59-834 (50mm - 2") 0-110lb Load
    • C59-836 (50mm - 2") 110-220lb Load
    • C59-838 (75mm - 3") 0-110lb Load
    • C59-840 (75mm - 3") 110-220lb Load
  • Rear Coil Spring Specs
    • C59-835V (25mm- 1") 0-110lb Load
    • C59-837V (25mm- 1") 220-440lb Load
    • C59-839V (25mm- 1") 550-770lb Load
    • C59-841V (50mm-2") 0-110Lb Load
    • C59-843V (50mm-2") 220-440lb Load
    • C59-845V (50mm-2") 550-770lb Load
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression - For creepy crawling and cornering
  • 15 Stage Rebound - Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminium Race Piston
  • 2.6" Precision Honed Shock Body
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM-HNBR Sealing System
  • TSUGAMITM CNC machined components for precise tolerances
  • ParkerTM Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance
  • 60mm Full 6063 aluminum remote reservoir 
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • MRA59-A685 / MRA59-A885 Long Travel Shocks Require 1.5" bump stop extensions and extended brake lines
  • If doing a 2.5" lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, faliure to complete these requirements could cause OE CV-axle faliure. 14mm bump stop extensions are also required
  • TRD axle shafts: PT362-3432B and PT362-3431B

****Coil seat for MRA59-A446 should be set at 175mm (6.87") from the strut bushing eye to top of coil isolator****

Dobinsons Spring & Suspension™ established in 1953, is largely based on Leaf and Coil Spring Manufacturing and the supply of Suspension Components. With several generations of family ownership and experiences, Dobinsons has become one of the leaders in the Spring Industry in Australia applying the years of knowledge into their products. The success of the business has come about by providing quality products, acquiring and using technical knowledge and having the equipment to perform and provide professional service.