Front Runner - Jeep Wrangler JL 4 Door (2018-current) Slimline II 1/2 Roof Rack W/drop Down Table Kit

Gear up with the ultimate space-economizing combo for your Jeep Wrangler JL 4, with the Slimline II 1/2 Roof Rack Kit and Drop Down Tailgate Table kit. Pack your gear on the roof of your Jeep and create table space from the rear door panel for food prep or map checking on a brief refueling stop. A value packed offer to save you space and time.

This 1358mm/53.5" long, half-size, Slimline II cargo carrying roof rack kit for your Jeep Wrangler JL 4 Door contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.

The Drop Down Tailgate Table secures to the interior of the rear swing door, while the table opens downward when the latch is released. It is supported by 2 sliding stays, capable of holding 40kg (88.2lb).

The Drop Down Tailgate Table's primary tray has a surface area of 648mm (25.5") L x 331mm (13") W, and can be further increased in length by an additional 445mm (17.5") by sliding out the 12mm work surface extension.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

All Front Runner Racks are backed by a Limited Lifetime Warranty*

Note: Not suitable for 4xe models. Kits for the Mojave and diesel models are available:
Jeep Wrangler JL 2Door Mojave/Diesel (2018-Current) Extreme Slimline II Roof Rack Kit
Jeep Wrangler JL 4Door Mojave/Diesel (2018-Current) Extreme Slimline II Roof Rack Kit
Jeep Gladiator JT Mojave/Diesel (2019-Current) Extreme Slimline II Roof Rack Kit

Click here for Front Runner Roof Rack Accessories!

KRJW027T - Jeep Wrangler JL 4 Door (2018-Current) Slimline II 1/2 Roof Rack Kit - by Front Runner

Consisting of:
1x LASS027 - Leg Spacer 6mm (Pair)
4x LASS035 - Jeep JL/JT Mounting Leg / 130mm (Pair)
1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)

Material Used:
Black epoxy powder - coated T6 aluminum
High strength steel

Approximate Installed Weight: 32.94kg (72.62lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

TBRA030 - Drop Down Tailgate Table - by Front Runner

Consists of:
1 x Table Assembly
Installation Hardware
Fitting Instructions

Product Dimensions:
Closed Dimensions:
685mm (27") L x 358mm (14.1") W x 54mm (2.1") H

Fully Opened Dimensions:
1105mm (43.5") L x 335mm (13.2") W x 376mm (14.8") H

Total Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (69")
Height: 270mm (11")

Total Shipping Weight:
Weight: 43kg (95lbs)

• Installation Instructions for LASS035 (EN)
• Installation Instructions for RRSTM07 (EN)
• Installation Instructions for TBRA030 (EN)